The square shower tray is the most popular model chosen by those deciding to install a shower cabin in their bathroom. In many cases, this type of shower tray serves as a substitute for a bathtub. There are many variants, including both shallow and deep products. However, the most crucial aspect of any shower tray is the method of installation. Read on to learn the most important information about installing a shower tray in your bathroom.
Installing a Square Shower Tray — What You Need to Know
The first essential step before placing the square shower tray and shower cabin in the bathroom is proper preparation. The most important information is usually found in the manufacturer's instructions. It's there that you will find answers to what you should do or buy first. Moreover, it will also inform you about which adhesive or silicone to use, which version of the siphon to choose, and what kind of seals you need to install.
The next step is to determine where the shower tray can be installed. This is extremely important, especially regarding the installation of the entire drainage system, its outlet, and a series of pipes. Of course, in the initial stage, it is necessary to decide whether a low or high tray will be installed. At this moment, you can also decide whether you want your bathroom to have a shower with the help of legs or if you prefer to mount it directly into the floor. If you have trouble making a decision, simply check out, for example, the manufacturer's website to see how both versions present themselves.
Installing a Square Shower Tray on Legs — Step by Step
- First, deal with the drainage. Connect the drain hole to the appropriate size siphon and drainage pipe. Also, remember to install the overflow. Use seals and overflow pipes in this case.
- The next step is to install the legs. For this type of work, use a screwdriver to ensure the legs of the shower tray are stable during the use of the entire shower. Remember to measure the cover panel beforehand, which must be the same height as the legs.
- Proper installation of the shower tray at this stage requires the use of a level to help adjust it and determine the water drainage slope.
- Then, properly leveled and connected to drainage, place the shower tray at the chosen spot in the bathroom. Use silicone around the shower tray, especially in places close to the wall.
- If you do not opt for the original panel that hides the legs, use construction materials, for instance, create a wall of ceramic tiles.
What to Do When Installing a Square Shower Tray Directly in the Floor?
When opting for a low tray, first choose a spot in the floor for its placement. Remember this stage should already be considered when laying floor tiles, as you need to create a slope necessary for proper water drainage. Hence, the installation of the siphon occurs differently here, directly on the floor. Then check where the outlet hole is located, as this is crucial at this stage, and place the drainage in it. Remember to control the entire installation of the shower tray with a level. This solution helps prevent certain irregularities in the drainage system from appearing. Naturally, the installation of the shower tray requires applying sealant at the points where it contacts the wall. Thus, appropriate quality silicone should be used.
How to Install a Shower Tray - Summary
When self-installing a shower tray, remember a few important things.
- Plan (if possible, see on the website or in the store) which type of shower tray will suit you. This is extremely important because you need to be aware of where it will stand and whether it will be set on legs or directly in the floor. Therefore, choose a model that meets your needs, for example, a square shower tray from Mexen.
- Check what the instructions say about installing your shower tray, where you will also find described materials needed for its proper placement.
- Remember items such as mounting adhesive, seals, siphon, pipes — all these form part of a properly created drainage system.
- Create an appropriate drainage hole, correctly install the top part of the siphon, and make sure to properly mount the shower cabin or potentially obscure the legs.
Installing a shower tray does not have to be troublesome. Just follow the instructions step by step. This way, you can quickly achieve an interesting look for your bathroom with a very practical and functional shower tray.
Related products
Mexen Flat square shower tray slim 90 x 90 cm, black, chrome siphon - 40709090
€152.80 -19.97%
€122.29List price: €152.80
Availability: In stock
Mexen Flat square slim shower tray 100 x 100 cm, white, chrome siphon - 40101010
€165.10 -19.99%
€132.09List price: €165.10
Availability: In stock
Mexen Flat Square Slim Shower Tray 80 x 80 cm, Black, Chrome Siphon - 40708080
€137.10 -19.99%
€109.69List price: €137.10
Availability: In stock
Mexen Rio square shower tray 70 x 70 cm, white - 45107070
€115.90 -19.94%
€92.79List price: €115.90
Availability: In stock